Reactive Group Solid State Disks Ltd SCSIFLASH Arraid, LLC SCSI SDD
CF2SCSI  SCSIFLASH-MO, SCSI Fujitsu Magneto Optic Emulator to CF

CF2SCSI / SCSIFLASH-MO, SCSI Fujitsu Magneto Optic Emulator to CF

The Fujitsu SCSI Emulator allows the CF Cards up to 64GB (SLC) and 256GB (MLC) to attach to the SCSI bus. It will be It will be seen as a Magneto Optic Drive by the host computer. The SCSI MO Bridge can emulate many other Fujitsu Magneto Optic drives and can be programmed to suit the host systems requirements.

 Adobe PDF file icon 24x24

 CF2SCSI Datasheet

FLASH2GUI - Optional ethernet support for centralised backup & restore capability available removing the need to rotate media. Primary data storage is always written to the CF card. No software change to the host required.

More details on FLASH2GUI backup & restore software click here

Solid State Disks Ltd, design and manufacture the Solid State SCSI FLOPPYFlash™ drive


Manufacturer: Solid State Disk Ltd

Features

  • Small format PCB converts Compact Flash Media to appear as a Fujitsu Magneto Optic Emulator on a Host’s SCSI bus
  • 3.5” form factor PCB which will replace any 3.5” or 5 ¼” Fujitsu Magneto Optic Emulator
  • Will fit in a 3.5” disk slot using the same mountings
  • SCSI Host will typically see the device as a Fujitsu Magneto Optic Emulator of any emulation
  • Board is low power, using 5V only, and has an optional add-on display and pushbutton user interface
  • Microcode is field upgradable via integral serial port
  • Optional integration support available if required

Specifications

Board size: 3.5” Form factor – 3.75”x5.5”.

Compact Flash: Standard 3M header for Type 1 & 2 cards, Push button Ejector to remove CF.

CF Capacities Supported : ~ up to 256GB (MLC) for removable drive and non mission critical applications and up to 64GB (SLC) for fixed disk heavy read/write mission critical applications.

Power: 5 Volts only @ 0.8 Watt (Typical) + CF requirement.

Power connector: Standard Disk drive type SCSI-1 and 2 Compatible. 50 pin DIL 0.1” Connector.

SCSI transfer rate: 10Mbytes/second.

LCD Display: (optional) 2X16 backlit display with push button (mounted externally) for SCSI set-up , real time activity display and real-time diagnostics.

Programmable to Emulate any other Fujitsu Magneto Optic Emulators

RS232 Serial Port for microcode load and real time diagnostics.

Example Emulation Options

Model Number:

Dynamo 640SE DynaMo1300SCSI, 2300SCSI, MCR3230SS, MCJ3230SS MCM3064SS,MCE3064SS,MCF3064SS, MCM3130SS M2511A, M2512A, M2513A, M2512A0E, M2513P, M2541A MCB3064SS, MCC3064SS, MDC3064SS, MCE3064SS, MCJ3230SS

Our Partners