Reactive Group Solid State Disks Ltd SCSIFLASH Arraid, LLC
CF2SCSI  SCSIFLASH-PERTEC Interface ½ Tape Drive Emulator to CF

CF2SCSI / SCSIFLASH-PERTEC ½" Tape Drive Emulator to CF

The CF2SCSI / SCSIFLASH-PERTEC Bridge allows the CF Cards up to 64GB (SLC) and 256GB (MLC) to attach to the SCSI bus. It will be seen as a PERTEC ½" Tape Drive by the host computer.

 Adobe PDF file icon 24x24

 CF2SCSI Datasheet

FLASH2GUI - Optional ethernet support for centralised backup & restore capability available removing the need to rotate media. Primary data storage is always written to the CF card. No software change to the host required.

More details on FLASH2GUI backup & restore software click here

Solid State Disks Ltd, design and manufacture the Solid State SCSI SCSIFlash™ drive


Manufacturer: Solid State Disk Ltd

Features

  • Small format PCB converts Compact Flash Media to appear as a PERTEC 1/2" Tape Drive on a Host’s SCSI bus
  • 3.5” form factor PCB which will replace any 3.5” or 5 ¼” PERTEC 1/2" Tape Drive
  • Will fit in a 3.5” disk slot using the same mountings
  • SCSI Host will typically see the device as a PERTEC 1/2" Tape Drive of any emulation
  • Board is low power, using 5V only, and has an optional add-on display and pushbutton user interface
  • Microcode is field upgradable via integral serial port
  • Optional integration support available if required

Specifications

Board size: 3.5” Form factor – 3.75”x5.5”.

Compact Flash: Standard 3M header for Type 1 & 2 cards, Push button Ejector to remove CF.

CF Capacities Supported: ~ up to 256GB (MLC) for removable drive and non mission critical applications and up to 64GB (SLC) for fixed disk heavy read/write mission critical applications.

Power: 5 Volts only @ 0.8 Watt (Typical) + CF requirement.

Power connector: Standard Disk drive type SCSI-1 and 2 Compatible. 50 pin DIL 0.1” Connector.

SCSI transfer rate: 10Mbytes/second.

LCD Display: (optional) 2X16 backlit display with push button (mounted externally) for SCSI set-up , real time activity display and real-time diagnostics.

Programmable to Emulate any other PERTEC ½" Tape drive Emulator

RS232 Serial Port for microcode load and real time diagnostics.

Example Emulation Options

Our Partners