Reactive Group Solid State Disks Ltd SCSIFLASH Arraid, LLC
SCSIFLASH-CF Industrial Grade Compact Flash Card

SCSIFLASH-CF Industrial (SLC) Grade with Hardware Write Protect

SCSIFLASH-CF - The only Compact Flash cards approved for use in the SCSIFlash™ drive to provide optimal performance, endurance & reliability.

The Industrial Grade (SLC) CF card is perfectly suited for all SCSIFlash drive legacy applications. The SCSIFlash CF card is designed to replace the storage media previously used in traditional rotating disk drives including removable media seen in Magneto Optic & Floppy drives. The SCSIFlash Industrial CompactFlash® Memory Cards are embedded solid-state data storage systems for the industrial work place. Hardware write protect switch functionality.

Available in 4, 8, 16, 32, 64GB capacities

 Adobe PDF file icon 24x24

SCSIFLASH-CF Datasheet

 Adobe PDF file icon 24x24

Dynamic wear levelling - White paper

Solid State Disks Ltd, design and manufacturer of SCSIFLASH-CF Cards


Manufacturer: Solid State Disk Ltd

Product Details

Features

The CF2SCSI / SCSIFLASH CF uses SLC flash based technology offering;

  • Single Layer Cell (SLC)
  • Dynamic wear levelling Highest quality and reliability
  • High write endurance (BIT error rate 109, Cell write Endurance 100k, Data retention 10+ years)
  • Low disturb errors (Error detection & bad block management)
  • High speed
  • Hardware write protect switch functionality

Specifications

Performance
Data transfer mode PIO-4 mode or UDMA-4 mode (Default setting)
Data transfer rate
- 66.6MB/sec under UDMA-4 mode
- 16.6MB/sec under PIO-4 mode
Sequential read 40 MB/sec (Max. /with dual flash)
Sequential write 20 MB/sec (Max. / with dual flash)
Average access time 0.2ms (estimated)

Environmental specification
Operating temperature Standard grade -0 degree ~ +70 degree
Non-operating temperature Standard grade -50 degree ~ +95 degree
Humidity 10% ~ 95% non-condensing
Acoustic noise 0dB
Vibration 15G compliance to MIL-STD-810F
Shock 1,500G compliance to MIL-STD-810F
Altitude 70,000 feet

Power consumption
Power requirement +5V + 10% / +3.3V + 5%
Reading mode 1 Channel 78mA(Max.) / 2 Channel 124mA(Max.) UDMA4 Mode
Writing mode 1 Channel 67mA(Max.) / 2 Channel 121mA(Max.) UDMA4 Mode
Sleeping mode 1 Channel 1.2mA(Max.) / 2 Channel 1.8mA(Max.) UDMA4 Mode

Reliability
Wear-leveling Static wear-leveling algorithms
MTBF > 3,000,000 hours
ECC Enhanced management 4-bits per 512bytes block
Endurance > 2,000,000 cycles logically contributed by static wear-leveling and advanced bad sector management algorithms
Data reliability < 1 non-recoverable error in 1014 bits read
Data retention 10 years

Part Numbers

SCSIFLASH INDUSTRIAL GRADE (SLC) 4GB CF – Part Number – SF4GB-I-CF-T-INO-WP
SCSIFLASH INDUSTRIAL GRADE (SLC) 8GB CF – Part Number – SF8GB-I-CF-T-INO-WP
SCSIFLASH INDUSTRIAL GRADE (SLC) 16GB CF – Part Number – SF16GB-I-CF-T-INO-WP
SCSIFLASH INDUSTRIAL GRADE (SLC) 32GB CF – Part Number – SF32GB-I-CF-T-INO-WP
SCSIFLASH INDUSTRIAL GRADE (SLC) 64GB CF – Part Number – SF64GB-I-CF-T-INO-WP

Our Partners